Emergency-Stop Push Button - Optimum Optidrill B 34H Operating Manual


once a week (with the machine in operation),

after every maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the geared drill

are legible (clean them, if necessary),

are complete (replace if necessary).
INFORMATION
Use the following table in order to organize the checks.
General check
Equipment
Protective covers
Signs,
Markings
Date:
Functional check
Equipment
EMERGENCY-STOP
push button
Limit switch protective
cover
V-belt
Drill chuck protection
Date:
1.11

EMERGENCY-STOP push button

CAUTION!
Also after actuating the
EMERGENCY-STOP switch,
the drilling spindle
turning - depending on the
previously selected speed -
for a few seconds more.
GB B34H | B34HV
76
Check
Mounted, firmly bolted and not damaged
Installed and legible
checked by (signature):
Check
After actuating an EMERGENCY STOP push button the geared
drill must be switched off.
The geared drill must not be switched on, if the protective cover
of the V-belts is opened. An opening of the protective cover
during machine operating turns off the machine.
The geared drill must only be switched on, if the drill chuck
protection is closed. The engine must switch off when the drill
chuck protection is opened during operation.
checked by (signature):
is
EMERGENCY-
STOP
push button
Abb.1-2:
Translation of the original instructions
OK
Emergency stop
OK
Safety
Version 1.1.3 - 2020-07-21