Safety; Safety Instructions (Warning Notes); Classification Of Hazards - Optimum Opti drill B 24H Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
1

Safety

Glossary of symbols

gives further advice

calls on you to act

enumerations
This part of the operating instructions

explains the meaning and use of the warning notices included in these operating instruc-
tions,

defines the intended use of the drilling machine,

points out the dangers that might arise for you or others if these instructions are not
observed,

informs you about how to avoid dangers.
In addition to these operation instructions, please observe

the applicable laws and regulations,

the legal regulations for accident prevention,

the prohibition, warning and mandatory signs as well as the warning labels on the drilling
machine.
Always keep this documentation close to the drilling machine.
INFORMATION
If you are unable to solve a problem using these operating instructions, please contact us for
advice:
Optimum Maschinen Germany GmbH
Dr. Robert-Pfleger-Str. 26
D-96103 Hallstadt
email: info@optimum-maschinen.de
1.1

Safety instructions (warning notes)

1.1.1 Classification of hazards

We classify the safety warnings into various levels. The table below gives an overview of the
classification of symbols (ideogram) and the warning signs for each specific danger and its
(possible) consequences.
Ideogram Warning alert
DANGER!
WARNING!
CAUTION!
GB B24H | B24HV | B28H | B28HV
Page 6
Definition / consequence
Threatening danger that will cause serious injury or death to people.
A danger that might cause severe injury to the staff or can lead to death.
Danger of unsafe procedure that might cause injury to the staff or property
damages.
Original operating instructions
Safety
Version 2.2.2 dated 2014-03-07