Nbn - UTC Fire and Security Kidde AirSense SynaG Series Installation Manual

Appendix A: Configuration presets
NBN S 21-100
Table 55: Configuration presets
Preset Control
panel
21 Four-zone,
eight-zone
22 Four-zone,
eight-zone
21 Four-zone,
eight-zone
[1] The CleanMe feature is available only with Aritech detectors.
Table 56: Additional configuration characteristics
Default sounder delay
Default zone delay
Start/Restart sounders
Table 57: Inputs and outputs
Input/Output
INPUT1
INPUT2
OUT1
OUT2
OUT3
OUT4
Note: Two-zone control panels have only two outputs with EN 54-13 disabled (OUT1 and OUT2)
or a single output with EN 54-13 enabled (OUT1/2).
84
EOL type Output
type
Passive Class B
Passive, Class B
CleanMe
enabled [1]
EN 54-13 Class A
supervision
0 minutes
ON
Start sounders or restart stopped sounders at user level 2 with
or without a fire alarm event
Standard
Remote reset
Delays off
Evacuation sounders
Evacuation sounders
Warning sounders
Warning sounders
Warning Evacuation
sounder sounder
outputs outputs
2 2
2 2
1 1
EN 54-13
Remote reset
Delays off
Evacuation sounders
Warning sounders
SynaG Series Installation Manual
Zone type
Odd: Automatic
Even: Manual
Odd: Automatic
Even: Manual
Odd: Automatic
Even: Manual