En 54-2 Scandinavia - UTC Fire and Security Kidde AirSense SynaG Series Installation Manual

Appendix A: Configuration presets

EN 54-2 Scandinavia

Table 49: Configuration presets
Preset Control
panel
07 Two-zone
07 Four-zone,
eight-zone
08 Two-zone
08 Four-zone,
eight-zone
07 Two-zone
07 Four-zone,
eight-zone
[1] The CleanMe feature is available only with Aritech detectors.
Table 50: Additional configuration characteristics
Default sounder delay
Default fire routing delay
Default extended fire routing delay
Default zone delay
Start/Restart sounders
Table 51: Inputs and outputs
Input/Output
INPUT1 (Two-zone control
panel)
INPUT1 (Four- and eight-zone
control panels)
INPUT2
OUT1
OUT2
OUT3
OUT4
Note: Two-zone control panels have only two outputs with EN 54-13 disabled (OUT1 and OUT2)
or a single output with EN 54-13 enabled (OUT1/2).
82
EOL type Output
type
Passive Class B
Passive Class B
Passive, Class B
CleanMe
enabled [1]
Passive, Class B
CleanMe
enabled [1]
EN 54-13 Class A
supervision
EN 54-13 Class A
supervision
0
1
3
0n
Start sounders or restart stopped sounders at Operator
user level with or without a fire alarm event
Standard
Remote reset
Fire routing delay / extended fire
routing delay
Delays off
Sounder circuit
Sounder circuit
Sounder circuit
Fire routing
Sounder Fire routing
outputs outputs
2 0
3 1
2 0
3 1
1 0
1 1
EN 54-13
Remote reset
Fire routing delay / extended
fire routing delay
Delays off
Sounder circuit
Fire routing
SynaG Series Installation Manual
Zone type
Mixed
Mixed
Mixed
Mixed
Odd: Automatic
Even: Manual
Odd: Automatic
Even: Manual