En 54-2 Evacuation - UTC Fire and Security Kidde AirSense SynaG Series Installation Manual

EN 54-2 Evacuation

Table 46: Configuration presets
Preset Control panel
05 Two-zone
05 Four-zone,
eight-zone
06 Two-zone
06 Four-zone,
eight-zone
05 Two-zone
05 Four-zone,
eight-zone
[1] The CleanMe feature is available only with Aritech detectors.
Table 47: Additional configuration characteristics
Default sounder delay
Default zone delay
Start/Restart sounders
Table 48: Inputs and outputs
Input/Output
INPUT1
INPUT2
OUT1
OUT2
OUT3
OUT4
Note: Two-zone control panels have only two outputs with EN 54-13 disabled (OUT1 and OUT2)
or a single output with EN 54-13 enabled (OUT1/2).
SynaG Series Installation Manual
EOL type Output type
Passive Class B
Passive Class B
Passive, Class B
CleanMe
enabled [1]
Passive, Class B
CleanMe
enabled [1]
EN 54-13 Class A
supervision
EN 54-13 Class A
supervision
0
0n
Start sounders or restart stopped sounders at user level
2 with fire alarm event
Standard
Remote reset
Delays off
Sounder circuit
Sounder circuit
Sounder circuit
Sounder circuit
Appendix A: Configuration presets
Sounder Zone type
outputs
2 Mixed
4 Mixed
2 Mixed
4 Mixed
1 Odd: Automatic
Even: Manual
2 Odd: Automatic
Even: Manual
EN 54-13
Remote reset
Delays off
Sounder circuit
Sounder circuit
81