Cabinet layout for eight-zone control panels
Figure 2: Cabinet layout for eight-zone control panels
1. Seven-segment display
2. Zone and system connectors
3. Cable knockouts
4. Mounting screw knockouts
5. Network board connector (on the back of
the PCB)
6. Battery area
7. Power supply unit
Note:
Only selected regional models have the key and alarm counter connectors.
SynaG Series Installation Manual
8. Key connector
9. Alarm counter connector
10. Fuse terminal block
11. Power supply connector
12. Battery connector
13. Expansion board connector
14. Cable holder
Chapter 2: Installation
7