Table of Contents
Advertisement
Visual indications for current value and selected value
Current and selected values are indicated as follows.
Table 19: Visible indications for values
Status
Indication
Current value
Both decimal points on the display
are steady
New selected value Both decimal points on the display
are flashing
Other value
Both decimal points on the display
are off
To restore the previous configuration:
1. Set the display as shown below, and then press Enter.
To restore the factory configuration:
1. Set the display as shown below, and then press Enter.
Basic configuration
The default password for basic configuration is 3333. After entering the
password, the first displayed menu will be Basic default configuration (indicating
basic installer user level). For more information see "User level passwords and
indications" on page 28.
The basic configuration menu
Configuration options for this menu are shown in the table below. More
information for each option is included in the related topic.
Table 20: The basic configuration menu
Display
Menu
Basic default configuration
SynaG Series Installation Manual
Chapter 3: Configuration and commissioning
Values
See topic
Operating mode
All
31
Advertisement
Chapters
Table of Contents
