Chapter 3: Configuration and commissioning
Software, configuration, and serial number information
Use the corresponding menu option (shown below) to display software,
configuration, and serial number information. These details may be required for
troubleshooting and technical support.
Software version (control panel,
expansion board or fire network board)
Configuration version
Configuration time stamp
Configuration date stamp
Serial number (control panel,
expansion board or fire network board)
The following submenus are available for software version and serial number
menus:
Display
Description
Display the software version or serial number for the control panel
Display the software version or serial number for expansion board A
Display the software version or serial number for expansion board B
Display the software version or serial number for expansion board C
Display the software version or serial number for expansion board D
Display the software version or serial number for the network board
To check the software version:
1. Set the display as shown below, and then press Enter.
2. Select a value (fire panel, expansion board or fire network board) using the
value selection buttons (2 and 4).
50
SynaG Series Installation Manual