Cabinet Layout; Cabinet Layout For Two- And Four-Zone Control Panels - UTC Fire and Security Kidde AirSense SynaG Series Installation Manual

Chapter 2: Installation

Cabinet layout

Cabinet layout for two- and four-zone control panels

Figure 1: Cabinet layout for two- and four-zone control panels
1. Seven-segment display
2. Zone and fire system connectors
3. Cable knockouts
4. Mounting screw knockouts
5. Network board connector (on the back of
the PCB)
6. Battery area
7. Key connector
Note: Only selected regional models have the key and alarm counter connectors.
6
8. Alarm counter connector
9. Power supply unit
10. Power supply connector
11. Battery connector
12. Expansion board connector
13. Cable holder
14. Fuse terminal block
SynaG Series Installation Manual