The Advanced Configuration Menu - UTC Fire and Security Kidde AirSense SynaG Series Installation Manual

Chapter 3: Configuration and commissioning

The advanced configuration menu

Configuration options for this menu are shown in Table 25 below. More
information for each option is included in the related topic.
Note: All configurable options included in "Basic configuration" on page 31 are
also available from the advanced configuration menu.
Table 25: The advanced configuration menu
Display Menu
Advanced default
configuration
EN 54-13 supervision
Panel mode
Sounder delay
(or Evacuation sounder
delay for NBN S 21-100
mode)
Sounder operation during a
zone test
Sounder re-sound
Silence sounders disabled
time
Fire routing delay
(or Warning sounder delay
for NBN S 21-100 mode)
Extended fire routing delay
Add an expansion board
40
Values
Configuration presets, as
defined in "Basic default
configuration" on page 33
ON/OFF
EN 54-2
EN 54-2 Evacuation
EN 54-2 Scandinavia
BS 5839-1 (No 2nd stage)
BS 5839-1 (2nd stage)
NBN S 21-100
NEN 2535
Custom
00 to 10 minutes
ON/OFF
ON/OFF
0 to 10 minutes
00 to 10 minutes
00 to 10 minutes
00 to 04 modules
Operating mode
All
EN 54-2
EN 54-2 Evacuation
EN 54-2 Scandinavia
NBN S 21-100
NEN 2535
Custom
All
EN 54-2
EN 54-2 Evacuation
EN 54-2 Scandinavia
NBN S 21-100
All
All
All
EN 54-2
EN 54-2 Scandinavia
NBN S 21-100
NEN 2535
EN 54-2
EN 54-2 Scandinavia
NEN 2535
All
SynaG Series Installation Manual