Network Connection (Lan) - Riso GOCCOPRO 100 User Manual

16
Select [NT EMF 1.008] from the list of [Default
data type], and click [OK].
17
Transfer the test page onto a screen from the
[General] tab, and check that the original data is
correctly transferred.

Network Connection (LAN)

To establish network connection, the optional "RISO Network Card" is required.
1
Click [Control Panel] - [Hardware and Sound] -
[Devices and Printers].
2
Click [Add a printer].
3
Click [Add a local printer].
4
Create a TCP/IP port or an LPR port.
5
Insert the included [RISO GOCCOPRO Printer
Driver] CD-ROM into your computer's CD-ROM
drive.
6
Click [Have Disk].
7
Select the following inf file from [Browse], and
click [OK].
For Windows 7 (32-bit):
(CD-ROM): [Windows 32-bit] - [Driver] -
[WinVista_8] - [English] - RISODRV.INF
For Windows 7 (64-bit) :
(CD-ROM): [Windows 64-bit] - [Driver] -
[WinVista_8] - [English] - RISODRV.INF
8
Select [RISO GOCCOPRO Series], and click
[Next].
A test pattern is transferred onto a screen using
Frame 1 (frame length: 23.2" / 590 mm)
It is recommended to use a frame with the "MINI-
MUM" setting.
See "3) Selecting a Frame" on page 40.
18
Click [OK] to close the dialog box.
9
Enter [Printer Name], and click [Next].
10
Transfer the test page onto a screen, and check
that the original data is correctly transferred.
A test pattern is transferred onto a screen using
Frame 1 (frame length: 23.2" / 590 mm)
It is recommended to use a frame with the "MINI-
MUM" setting.
See "3) Selecting a Frame" on page 40.
11
Click [Finish] to close the dialog box.
12
Reboot your computer.
78