Network Connection; Connecting To Computers - Riso MH9 Series User Manual

Network Connection

Connecting to computers

¢ When using the SF5x30EII Series
The optional network interface card, "RISO NETWORK KIT" is required when connecting the computer to the RISO
printer through a network to use as a network printer.
Connect the RISO printer to the network and configure printer network settings (such as the IP address) in advance.
B Use a commercially available Ethernet STP cable (10BASE-T or 100BASE-TX, category 5 or higher) appropriate for
your network environment. (You can use either a straight cable or crossover cable.)
B You cannot directly connect the machine to a communication line offered by a telecommunication carrier (such as a
mobile communications company, fixed-line telecoms company, or Internet provider). When connecting the machine
to a network, make sure it is connected via router.
¢ When your RISO printer is connected with one computer
¢ When your RISO printer is connected on network
Ethernet cable
Hub
Ethernet cable
Chapter 2 Installing the Printer Driver Chapter 2 Installing the Printer Driver
LAN port of your RISO printer
LAN port of your RISO printer
15 15