Problem
A screen master has not
been cut.
The <START> indicator
is lighting.
A "- - - -" sign appears on
the display, and the
machine does not oper-
ate.
Cause
The screen master was not cut with
the cutter.
The original data was received in the
screen making queue to be ready for
output.
You may have turned off the machine
during operation.
Cut the screen master in the following steps.
1.
Open the Screen Making Unit Cover.
2.
Open the Screen Making Unit.
3.
Turn off the power switch.
4.
Pull out the imaged screen from the Imaged
Screen Outlet.
5.
Cut the screen master with scissors.
6.
Turn on the power switch.
7.
Rewind the screen master and set it again.
"Setting a New Screen Master Roll" on
page 20
Press the <START> Key to output the data.
To erase the data in the screen-making queue,
press the <ONLINE> Key.
Press the <START> Key.
66
Action