Handling And Operation; Operation Environment; Machine Handling; Locations Of Caution Labels - Riso GOCCOPRO 100 User Manual

Handling and Operation

Operation Environment

• The appropriate environment requirements
are as follows.
• Temperature range: 59°F to 86°F / 15°C to
30°C
• Humidity range: 40% to 70%
(no condensation)

Machine Handling

● Do not place water containers or metallic objects on
the machine. Fire or electric shock may occur if water
or metallic objects fall into the machine.
● Do not use a combustible spray and flammable sol-
vent near the machine. If sprayed gas and the flamma-
ble solvent contacts electronic components inside the
machine, fire or electric shock might occur.
● Do not insert any metallic or flammable substance into
the machine through any opening. This can result in
fire or electric shock.
● Do not remove machine covers. Exposing internal
parts may result in electric shock.
● Do not disassemble or rebuild the machine
by yourself. This can result in fire or elec-
tric shock.
● If the machine emits excessive heat,
smock or foul odor, immediately turn off
the POWER, unplug the power cord and
contact your dealer. Failure to do so can
result in fire or electric shock.
● If something drops inside the machine,
immediately turn off the POWER, discon-
nect the power plug from the outlet, and
contact your dealer. Failure to do so can
result in fire or electric shock.
70%
40%
● Never put your finger into an opening near the Imaged
Screen Outlet. This may cause injury.
● If lifting or moving the machine, be sure to hold the
bottom of the main unit. Holding the upper part of the
main unit may cause it to fall and result in injury.
● Do not directly touch the thermal print head with your
fingers. The thermal print head may be heated and
cause burns.

Locations of Caution Labels

This machine has some caution labels to ensure safe
operation. Follow the indications of those labels and use
this machine safely.
9
Introduction