Advertisement
Quick Links
This guide contains excerpts from the
User's Guide explaining the basic
operations for printing using paper
originals.
This guide supports the Read Out Loud
feature in Adobe Acrobat Reader.
Recommended operating environment for
Read Out Loud:
Windows 10
Adobe Acrobat Reader DC
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Riso SF EII Series
Summary of Contents for Riso SF EII Series
- Page 1 This guide contains excerpts from the User's Guide explaining the basic operations for printing using paper originals. This guide supports the Read Out Loud feature in Adobe Acrobat Reader. Recommended operating environment for Read Out Loud: Windows 10 Adobe Acrobat Reader DC...
- Page 2 Page 1 Overview Section 1: Preparation before Printing This guide describes the following procedures. Section 1: Preparation before Printing Sub-section 1: Section 2: Placement of Originals Setting up the paper feed tray and Section 3: Printing of Paper Originals the paper Step 1 Open the paper feed tray.
- Page 3 Page 2 This machine identifies the paper After replacing the paper with that of a size according to the position of different type, reposition the paper-feed the feed-tray paper guides. If the setting lever. feed-tray paper guides do not fit After replacing the paper with that of a tightly to the paper, the paper size different size, also adjust the receiving-...
- Page 4 Page 3 Sub-section 2: When using thick paper, set the receiving-tray paper guides a Setting up the paper receiving tray little wider than the actual paper width. Step 1 The optimal position of the receiving-tray paper guides Open the paper receiving tray. varies depending on conditions While holding the paper receiving tray with your such as the paper type, print...
- Page 5 Page 4 For normal paper How to close the paper receiving tray Open all four of the paper arrangers. Step 1 Remove all of the printed paper. Step 2 Slide the receiving-tray paper guides and paper stopper to the ends. When a printed area is concentrated on one side of the page...
-
Page 6: Section 2: Placement Of Originals
Page 5 Step 6 Section 2: Close the paper receiving tray. Placement of Originals Originals can be scanned by using the glass platen or the optional auto document feeder. Relation of original and paper orienta- tions Make sure that the orientations of the original and the paper are the same. - Page 7 Page 6 Sub-section 1: Sub-section 2: When using the glass platen When using the auto document feeder Step 1 Step 1 Open the platen cover. Place originals on the auto Step 2 document feeder. Place the originals with the scanning side Place an original on the glass facing up.
-
Page 8: Section 3: Printing Of Paper Originals
Page 7 Step 4 Section 3: Check if the paper on the paper Printing of Paper Originals feed tray is ready. This section describes the procedure to scan and The size of the placed paper is print paper originals. displayed in [Paper] in the master making basic screen. - Page 9 Page 8 Step 10 To print more copies, enter the number of copies and press the Set the printing conditions. [START] key. To start master making for the next Check the printing position and density on the original, replace the original and proof copy.
- Page 10 Copyright 2019 RISO KAGAKU CORPORATION 2019/5 SF9EII_BG-EN_01...
Need help?
Do you have a question about the SF EII Series and is the answer not in the manual?
Questions and answers