Installation Procedure - Riso GOCCOPRO 100 User Manual

Installation Procedure

• Be sure that the machine and computer are not connected by a USB cable.
• For Windows 7 (64-bit) / Windows Vista (64-bit), perform "Creating a USB
Port" in advance.
"Creating a USB Port" on page 29
1
Turn on the computer.
2
Insert the included [RISO GOCCOPRO Printer Driver]
CD-ROM into your computer's CD-ROM drive.
The installer is automatically started.
If the installer does not start up, double-click on the
[Setup(.exe)] file in the folder below.
For Windows (32-bit)
(CD-ROM) - [Windows 32-bit] folder
For Windows (64-bit)
(CD-ROM) - [Windows 64-bit] folder
If the [User Account Control] dialog box appears,
click [Yes] or [Allow] (For Windows Vista),
3
1) Select your language from the drop-down list.
2) Click [OK].
1) 1) 1)
2) 2) 2)
4
When [Before installation] dialog box appears,
click [Next].
For Windows 7 (64-bit) / Windows Vista (64-bit):
Proceed to step 18.
5
1) Select [Connect via a USB cable].
2) Click [Next].
For Windows 10 / Windows 8.1 / Windows 8:
Proceed to step 23.
The [USB Port Settings] dialog box appears.
6
Turn on the machine.
23
1
Preparations for Use for the First Time
1) 1) 1)
2) 2) 2)
ON