For Windows 7; Usb Connection - Riso GOCCOPRO 100 User Manual

For Windows 7

• To install the printer driver, it is necessary to log on to Windows by the
account with the authority to change the system setting (administrator, etc.).
• This printer driver does not support printer sharing.

USB Connection

1
Turn on the machine.
2
Connect a USB cable to the machine.
3
Start your computer.
4
Connect the USB cable to your computer.
Do not proceed to the next step until
[Device driver software was not success-
fully installed] appears on the task tray.
5
Start [Device Manager].
[Start] - enter "Device Manager" in the [Search pro-
grams and files], and then click [Device Manager].
6
1) Click [Other devices].
2) Right-click [RISO GOCCOPRO Series].
3) Click [Update Driver Software] from the menu
that appears.
7
Select [Browse my computer for driver soft-
ware].
8
Insert the included [RISO GOCCOPRO Printer
Driver] CD-ROM into your computer's CD-ROM
drive.
9
Click [Browse], and select the following folder
and then click [OK].
For Windows 7 (32-bit):
(CD-ROM): [Windows 32-bit] - [Driver] -
[WinVista_8] - [English]
For Windows 7 (64-bit):
(CD-ROM): [Windows 64-bit] - [Driver] -
[WinVista_8] - [English]
10
Select [RISO GOCCOPRO Series], and click
[Next].
11
Click [Close], and reboot your computer.
12
Click [Control Panel] - [Hardware and Sound] -
[Devices and Printers].
13
Right-click [RISO GOCCOPRO Series], and
select [Printer Properties].
14
Click [Print processor] on the [Advanced] tab.
15
Click the following print processor from the list
of [Print processor].
For Windows 7 (32-bit): [R35V8EP]
For Windows 7 (64-bit): [R35V6EP]
77
Appendix