Network Settings; Setting Network Details With The Operation Panel - Riso ComColor Series Administrator's Manual

Network Settings

These settings are required for connecting the
machine to a network environment.
<Description of settings>
• Printer name
Enter a printer name displayed on the network. The
name must be up to 16 characters long.
• DHCP server
A DHCP server automatically assigns an IP
address to each client computer on the network.
• IP address, Subnet mask, Gateway address
When not using the DHCP server, specify an IP
address, a subnet mask and a gateway address.
• Change
Configure settings such as DNS, Proxy server, and
RISO Console connection.
■ Setting network details with the
operation panel
<Description of settings>
• DNS
A domain name is converted to an IP address.
• Proxy server
Access from the outside is controlled to enhance
security. Specify an address and a port.
• RISO Console connection
Specify a protocol to connect to the RISO Console.
https is http to which an encryption function is
added.
26
Press [Network setting] on the
1
[Admin. Settings] screen.
Configure each setting for a
2
network and press [Change].
Configure details for the network
3
and press [OK].
● When Proxy server is set to [Use], specify a
user name and a password.
● When setting with the RISO Console, specify a
network transfer mode [Link Speed/ Duplex
Mode].
ComColor Series Administrator's Guide 08