Riso GOCCOPRO 100 User Manual page 65

Error Location
Indicator/Error Error No.
Type Indicator
None
2
1
None
None
2
3
None
b-32, b-33
L-01
Error Description
A screen master has run out.
The Screen Making Unit Cover
is opened.
A Screen Master Roll has not
been set, or has not been cor-
rectly set.
The Screen Making Unit is not
closed.
An error with RISO Network
Card (option).
The margin size is insufficient.
63
Action
Open the Screen Making Unit Cover, and set a
new Screen Master Roll.
"Setting a New Screen Master Roll" on
page 20
Firmly close the Screen Making Unit Cover.
Insert the leading edge of Screen Master Roll
into its space under the Screen Master Guide
Flap until it stops, and then firmly close the
Screen Making Unit Cover.
If the screen master has been wrinkled or cut at
an angle, cut the edge of the screen master
straight and then set it again.
"Setting a New Screen Master Roll" on
page 20
Firmly close the Screen Making Unit.
"Setting a New Screen Master Roll" on
page 20
Press the <All RESET> Key.
When the error is not canceled, contact your
dealer.
Perform the following actions.
1.
Press the <ALL RESET> Key to cancel the
error.
2.
Press the <FRAME SELECTION> Key to
select a different frame.
5
Troubleshooting