How To Register A Frame - Riso GOCCOPRO 100 User Manual

How to Register a Frame

For Frame 1 to Frame 5 that can be selected in <FRAME SELECT>, sizes of frames used in
usual operations can be registered. Measure the outer length of the frame, and register it.
You can select the registered frame by pressing the <FRAME SELECT> Key on the
Control Panel.
The frame length can be set between 8.0" to 47.2" / 200 mm to 1200 mm. Any
frame whose outer size is outside the following range cannot be registered.
Screen master
feed direction
Frame length (Screen length)
(3) Original data length + (4) Margin size on the End side
*1
Frame length:
*2
Margin on the Top side: 2.4" / 60 mm or more
*3
Margin on the End side: 2.4" / 60 mm or more
For Frame 1 and Frame 2, the lengths of "23.2" / 590 mm" and "18.9" / 480 mm" are
registered respectively as factory default settings. These lengths can also be
changed.
1
Press the <CUSTOM SETTING> Key.
<CUSTOM SETTING> Indicator lights.
(1)
(2) (3)
*1
= (2) Margin size on the Top side
8.0" to 47.2" / 200mm to 1200 mm
<CUSTOM SETTING>
Indicator
<CUSTOM SETTING>
Key
(4)
*2
+
*3
2
1) Enter the item number to be changed using
the 0 to 9 keys.
Ex. To change the setting of Frame 3, enter "3".
To correct the entered item number, press the
<C> Key to delete the entered value.
2) Press the <ENTER> Key.
50
Display
2) <ENTER> Key
1) 0 to 9 Keys