Replacing the power-button board
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1. Align and slide the power-button board on the power-button board bracket and snap it into place.
2. Align the screw holes on the power-button module with the screw holes on the top cover.
3. Replace the screws that secure the power-button module to the top cover.
4. Route the power-button module cable through the routing guide on the top cover.
Post-requisites
1. Replace the
top
cover.
2. Replace the
right-side
3. Replace the
left-side
cover.
computer. After working inside your computer, follow the instructions in
cover.
After working
www.dell.com/
85