Removing The Memory Modules; Prerequisites; Procedure - Alienware Aurora R6 Service Manual

Removing the memory modules

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1. Remove the left-side cover.
2. Follow the procedure from step 1 to step 4 in

Procedure

1. Locate the memory-module slots on the system board. For more information, see
2. Push the securing clips away from the memory module.
3. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
NOTE: Repeat step 2 to step 3 to remove any other memory modules installed in your computer.
CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch the
components on the memory module.
1. memory module
3. memory-module slot
54
computer. After working inside your computer, follow the instructions in
"Removing the power-supply unit".
"System-board
2. securing clips (2)
4. system board
After working
www.dell.com/
components".