Replacing The Top-Chassis Fan; Procedure; Post-Requisites - Alienware Aurora R6 Service Manual

Replacing the top-chassis fan

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1. Align the holes on the top-chassis fan with the holes on the top-chassis fan bracket.
2. Insert the ends of the rubber grommets through the holes at each corner of the fan.
3. Align the grommets in the fan with the holes at each corner of the top-chassis fan bracket and pull through until they snap into
place.
4. Route the top-chassis fan cable through the routing guide on the bracket.
5. Align the tabs on the top-chassis fan with the slots on the chassis and slide the fan until it snaps into position.
6. Replace the screw that secures the top-chassis fan to the chassis.
7. Connect the top-chassis fan cable to the system board.

Post-requisites

1. Follow the procedure from step 10 to step 11 in
2. Replace the left-side cover.
computer. After working inside your computer, follow the instructions in
"Replacing the power-supply unit".
After working
www.dell.com/
77