Removing The Solid-State Drive; Prerequisites; Procedure - Alienware Aurora R6 Service Manual

Removing the solid-state drive

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.

Prerequisites

1. Remove the left-side cover.
2. Follow the procedure from step 1 to step 4 in
3. Remove the graphics card.

Procedure

1. Locate the solid-state drive slot on the system board. For more information, see
2. Remove the screw that secures the solid-state drive to the system board.
3. Slide and lift the solid-state drive off the system board.
1. solid-state drive
3. solid-state drive slot
computer. After working inside your computer, follow the instructions in
"Removing the power-supply unit".
"System-board
2. screw
4. system board
After working
www.dell.com/
components".
57