Replacing The Bottom Cover; Procedure; Post-Requisites - Alienware Aurora R6 Service Manual

Replacing the bottom cover

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1. Turn the computer over until the base is facing up.
2. Align the tabs on the bottom cover with the slots on the chassis and snap the bottom cover in place.
3. Turn the computer over and place it in upright position.

Post-requisites

1. Replace the two 2.5-inch
2. Replace the left-side cover.
computer. After working inside your computer, follow the instructions in
hard-drive cages.
After working
www.dell.com/
29