Power-Button Board; Removing The Power-Button Board - Alienware Aurora Ryzen Edition R14 Service Manual

Steps
1. Place the front bezel on a flat surface and locate the power-button board.
2. Bring the AlienFX LED board near the front bezel and connect the power-button board cable to the power-button board.
3. Align the screw hole of the AlienFX LED board to the screw hole on the front bezel.
4. Replace the four screws (M3x8) that secure the AlienFX LED board to the front bezel.
Next steps
1. Install the front bezel.
2. Install the right-side cover.
3. Install the top cover.
4. Install the left-side cover.
5. Follow the procedure in

Power-button board

Removing the power-button board

Prerequisites
1. Follow the procedure in
2. Remove the left-side cover.
3. Remove the top cover.
4. Remove the right-side
5. Remove the front bezel.
6. Remove the front AlienFX LED
About this task
The following images indicate the location of the power-button board and provide a visual representation of the removal procedure.
68
After working inside your
Before working inside your
cover.
board.
computer.
computer.