Clearing Cmos Settings - Alienware Aurora R6 Service Manual

Prerequisites
1. Remove the left-side cover.
2. Follow the procedure from step 1 to step 4 in
Procedure
1. Locate the password jumper (P215) on the system board.
For information on the location of the Password jumper, see
2. Remove the jumper plug from pins 215.
3. Follow the procedure from step 8 to step 9 in
4. Replace the left-side cover.
5. Turn on your computer and wait until the operating system is completely loaded.
6. Shut down your computer.
7. Remove the left-side cover.
8. Follow the procedure from step 1 to step 3 in
9. Replace the jumper plug on pins 215.
a. jumper plug
b. P215
Post-requisites
1. Follow the procedure from step 10 to step 11 in
2. Replace the left-side cover.

Clearing CMOS Settings

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
"Removing the power-supply
System-board
"Replacing the power-supply
"Removing the power-supply
"Replacing the power-supply
computer. After working inside your computer, follow the instructions in
unit".
components.
unit".
unit".
unit".
After working
www.dell.com/
99