Replacing The Antenna; Procedure; Post-Requisites - Alienware Aurora R6 Service Manual

Replacing the antenna

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1. Adhere the antenna to the chassis.
2. Route the antenna cables through the routing guides on the chassis and slide the cables through the cable-routing slot on the
chassis.
3. Route the antenna cables through the routing guides inside the chassis.

Post-requisites

1. Follow the procedure from step 1 to step 3 in
2. Replace the top cover.
3. Replace the right-side
4. Replace the left-side cover.
computer. After working inside your computer, follow the instructions in
"Replacing the wireless
cover.
card".
After working
www.dell.com/
71