Removing The Optical Drive; Prerequisites; Procedure - Alienware Aurora R6 Service Manual

Removing the optical drive

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1. Remove the left-side cover.
2. Follow the procedure from step 1 to step 4 in

Procedure

1. Disconnect the power and data cable from the optical-drive.
2. Pull the securing tab to release the optical-drive carrier from the chassis.
1. optical-drive carrier
3. securing tab
5. data cable
3. Push to slide the optical-drive assembly out through the front of the computer.
78
computer. After working inside your computer, follow the instructions in
"Removing the power-supply unit".
2. optical drive
4. power cable
After working
www.dell.com/