Alienware Aurora R6 Service Manual page 100

Prerequisites
1. Remove the left-side cover.
2. Follow the procedure from step 1 to step 4 in
Procedure
1. Locate the CMOS jumper (P217) on the system board.
For information on the location of the CMOS jumper, see
2. Disconnect the system-board power cable from the system board.
3. Remove the jumper plug from pins 217 and replace it on pins 216 (P216).
4. Wait for 5 seconds.
5. Remove the jumper plug from pins 216 and replace it on pins 217.
6. Connect the system-board power cable to the system board.
1. jumper plug
3. P216
Post-requisites
1. Follow the procedure from step 10 to step 11 in
2. Replace the left-side cover.
100
"Removing the power-supply
"System-board
2. P217
4. system board
"Replacing the power-supply
unit".
components".
unit".