Removing The Processor-Cooling Assembly; Prerequisites; Procedure - Alienware Aurora R6 Service Manual

Removing the processor-cooling assembly

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1. Remove the left-side cover.
2. Remove the right-side
3. Remove the top cover.

Procedure

1. Remove the screws that secure the radiator and fan assembly to the radiator and fan cage.
a. screws (4)
b. radiator and fan cage
2. Follow the procedure from step 1 to step 4 in
3. Loosen the captive screws that secure the VR heat sink to the system board.
4. Lift the VR heat sink off the computer.
computer. After working inside your computer, follow the instructions in
cover.
"Removing the power-supply unit".
After working
www.dell.com/
47