Removing the rear trim cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1. Remove the
left-side
cover.
2. Remove the
right-side
3. Remove the
top
cover.
Procedure
1. Place the computer in an upright position.
2. Using the tab, slide and remove the rear trim cover from the chassis.
a. chassis
b. rear trim cover
86
computer. After working inside your computer, follow the instructions in
cover.
After working
www.dell.com/