Steps
1. Place the front bezel on a flat surface and locate the power-button board.
2. Bring the AlienFX LED board near the front bezel and connect the power-button board cable to the power-button board.
3. Align the screw hole of the AlienFX LED board to the screw hole on the front bezel.
4. Replace the four screws (M3x8) that secure the AlienFX LED board to the front bezel.
Next steps
1. Install the
front
bezel.
2. Install the
right-side
cover.
3. Install the
top
cover.
4. Install the
left-side
cover.
5. Follow the procedure in
Power-button board
Removing the power-button board
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
cover.
3. Remove the
top
cover.
4. Remove the
right-side
5. Remove the
front
bezel.
6. Remove the
front AlienFX LED
About this task
The following images indicate the location of the power-button board and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
cover.
board.
computer.
computer.
73