Wiring; Wiring Connections; Install The Autoboom Node - Raven AutoBoom Installation Manual

CHAPTER
5

Wiring Connections

For wiring connections made outside the cab, apply dielectric silicone grease (P/N 222-0000-006) generously
on both the male and female ends of the connectors. Application of the grease will prevent corrosion to the pins
and wires.

Install the AutoBoom Node

AutoBoom Node Installed
FIGURE 1.
Manual No. 016-0230-080
W iring
C h a p t e r 5
CAUTION
Always connect the power cable as the last
step in the wiring process and verify that the
power leads are connected with the correct
polarity. Reversing power leads can cause
severe damage to the equipment.
19