Raven AutoBoom Installation Manual page 15

AutoBoom Valve Mounted to the Machine
FIGURE 2.
Secure the mounting plate to the cross rail on the machine's center rack using two 4" W x 5" L x 3/8" thread
2.
U-bolts (P/N 107-0171-606) and four 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).
Install the Pressure and Tank Hoses
Manual No. 016-0230-080
WARNING
Hydraulics are under pressure. Care should
always be taken with a a system that has been
pressurized. When disconnecting or purging
hydraulic hoses, be aware that the hydraulic
fluid within the machine's system may be
extremely hot and under high pressure.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to
prevent any foreign material or contaminants
from being introduced into the machine's
hydraulic system.
Objects or materials that are able to bypass the
machine's hydraulic filtration system will
adversely affect performance and possibly
damage the AutoBoom hydraulic valve.
Hydraulic System
11