Ssas Operation Flow; Operation Flow - JRC JUE-87 Instruction Manual

3.

SSAS Operation Flow

3.1 Operation flow

Open the hinged cover of the security button.
Press the button and then lift your finger from the button.
3
The security button is latch type (the button is caught and doesn't return, and it
returns when pushed again).
You can cancel the Security Alert transmission by pressing the security button again
within 30 seconds from initial pressing. Refer to Fig. 3.3.1.
The Security Alert is sent to the address which has been preset in
"Security Alert Transmission#1"option in "Setup" dialogue box, after 30 seconds
from initial pressing.
If another address has been setup in the "Security Alert Transmission#2- #5", the
Security Alert transmission is started in order of transmitting setting file #2, #3, #4,
and #5 at intervals of 12 minutes.
The Security Alert transmission is repeated in accordance with the interval which
setup in transmission setup files ("Security Alert Transmission#1- #5").
To stop the Security Alert transmission, press the button again.
If any of other security button has been pushed, the Security Alert does not stop.
Fig.3.1 Operation Flow
3-1