JRC JUE-87 Instruction Manual page 34

Step4 Press <Ctrl>+function key10 <F10>, and then "Password" dialog box is displayed.
Step5 Enter your password and press <Enter >key.
Refer to chapter 3.2 about the process of
password setting.
Step6 Press function key 1<F1>, and then the warning window is displayed.
Fig.3.4.1f Warning Window (Confirming Start of the Test)
Set up
Date & time
Security Alert transmission
confiG
log-Out initiation
log-In initiation
Security Alert transmission #1
Performance test initiation
Security Alert transmission #2
Scheduled transmission
Security Alert transmission #3
Warning
Land id registration for polling
Security Alert transmission #4
Closed network id selection
Start SSAS Test? Security Alert transmission #5
Peripheral Function
OK Cancel
F1: SSAS TEST ON
F10:Previous
3-20
Set up
Date & time
Scheduled transmission
confiG
log-Out initiation
log-In initiation
Scheduled transmission #1
Performance test initiation
Scheduled transmission #2
Scheduled transmission
Scheduled transmission #3
Password
Land id registration for polling
Scheduled transmission #4
****
Closed network id selection
Scheduled transmission #5
Peripheral Function
passWord
EPADR information
F10:Previous
Fig.3.4.1e Password Dialogue Box
F10:Previous
F10:Previous