Security Alert Transmission Test; Transmission Test - JRC JUE-87 Instruction Manual

3.4 Security Alert Transmission Test

3.4.1 Transmission Test

This test can be done without sending real Security Alert.
Confirm all of security buttons are turned off before you start the test transmission.
Test transmission is impossible as long as any button is remained turned on.
The test transmission can be carried out with setting up for real Security Alert transmission.
Ready Rec(POR): Good-15
Position: N 35°34' E 139°50' Course: 120deg Speed: 10.0kn
Editing telex file: SSAS Line:1 Column: 1 Size: 20
TO+jmarine@m1.jrc.co.jp
SUBJ+ SSAS MESSAGE
This is SSAS message.
SHIP NAME: JRCMARU
MMSI:431995000
[End of File ]
F1:Insert Off
Destination receives following message when above window is transmitted.
This is SSAS MESSAGE
Ship Name :JRCMARU
MMSI :431995000
TEST TEST(*1)
MES NO, 987654321(*2)
LAT,N12 34.56LON,E123 45.56,UTC,07.01.2004 12:34,SOG, 10.0KT,COG,20DEG(*3)
Fig.3.4.1b Example of Received Message of Test Transmission
*1) "TEST TEST" is written in this place at test transmission, and "SECURITY SECURITY" is written
in here at real Security Alert transmission.
*2) MES NO is the number of mobile earth station. of each ship.
*3) Various information of GPS is attached automatically.
NOTE
F2:Ins_Line F3:Block
F7:Quit F8:Save As
Fig.3.4.1a Example of Test Transmission Window
(When the message of Fig.3.4.1a is transmitted)
3-18
20 JUN,12 13:00(UTC)
at 13:00(UTC)
F4:Del_Word F5:Del_Line
F9:Save & Quit F10: - Others -