JRC JUE-87 Instruction Manual page 20

[Setting of Network type]
Step 12 Press <Enter>, "Network type" menu box is displayed and then select "Telex" option by pressing the
up/down arrow keys, and then press <Enter>.
requesting Interval
lEs
Network type
E-mail
Prefix code
Telex
Destination code &
pstN
subscriber's number
Facsimile
Character code
psDn
SSAS message
Closed net (dnid)
Security Alert
Special access
[Setting of Prefix code]
Step 13 Press <Enter>, and enter the prefix code, and then press <Enter>.
[Setting of Destination code & subscriber's number]
Step 14 Press <Enter>, and then enter the country code and subscriber's number of final destination.
e.g.
"072-0223344" has been entered as Destination code and subscriber's number.
Destination code &
subscriber's number: 072 - 1234567
(a) Telex Country code
(b) Subscriber's number
[Setting of Character code]
Step 15 Press <Enter>, Select "Ia5" by pressing the up/down arrow keys, and then press <Enter>.
e.g.
Character code: Ia5 iTa2
[Setting of SSAS message]
Step 16 Press <Enter>, then message editing screen is opened. Create the message in the screen, and press
<F9> (Save and quit key) for return to "Security Alert transmission #1" screen. Refer to Chapter 3.2.2
about contents of message.
Security Alert transmission #1 Set up
Date & time
: 1 hour
Network type
log-Out initiation : 003-103-203-303
log-In initiation : E-mail
Performance test initiation
:00
Scheduled transmission
: 28
Land id registration for polling
: Ia5
Closed network id selection
Peripheral Function :To:jmarine@ml.j...
Password : oN
F9:Cancel F10:Save
F10:Previous
Fig.3.2.1i Network Type Menu Box
(a) (b)
3-6
Security Alert transmission
Security Alert transmission#1
Security Alert transmission#2
Security Alert transmission#3
Security Alert transmission#4
Security Alert transmission#5
F1: SSAS TEST F10:Previous
F10:Previous