JRC JUE-87 Instruction Manual page 33

Set the Security Alert setup before executing Test transmission.
Test transmission is not executed if the setup is not carried out yet.
＜Time required until completing Test transmission＞
Transmission setting number
1 (5 minutes) 2 (17 minutes) 3 (29 minutes) 4 (41minutes) 5 (53 minutes)
The time required rises and falls according to the status of the line and the message length, etc.
Step 1 Press <ESC> until the screen clear.
Step 2 Press <ALT> + <U> to obtain "Set up" dialogue box.
Step 3 Select "Scheduled transmission" option by pressing the up/down arrow key, and then press <Enter>.
"Scheduled transmission" menu box is displayed.
NOTE
NOTE
Date & time
confiG
log-Out initiation
log-In initiation
Performance test initiation
Scheduled transmission
Land id registration for polling
Closed network id selection
Peripheral Function
passWord
EPADR informAtion
Fig.3.4.1c Setup Menu Box Selecting Scheduled Transmission
Date & time
confiG
log-Out initiation
log-In initiation
Performance test initiation
Scheduled transmission
Land id registration for polling
Closed network id selection
Peripheral Function
Password
EPADR information
Fig.3.4.1d Scheduled Transmission Menu Box
3-19
Set up
F10:Previous
Set up
Scheduled transmission
Scheduled transmission #1
Scheduled transmission #2
Scheduled transmission #3
Scheduled transmission #4
Scheduled transmission #5
F10:Previous
F10:Previous
3