Working Technique
Direct the nozzle strictly towards the surface
of the tooth. Respect a distance of 3 to 5 mm.
You can vary the angle between nozzle and
tooth from 30 to 60 degrees. The flatter the angle,
the larger the area cleaned.
During treatment, direct the high-speed
pump towards the air/powder jet deviated by the
tooth. The angle of reflection is identical to the
angle of incidence.
44
FB-543_6_ed_2014_10_Handy 3 Perio.indd 44
Darbo metodas
Purkštuką nukreipkite griežtai į danties
paviršių. Išlaikykite 3–5 mm atstumą.
Galite keisti kampą tarp purkštuko ir danties
nuo 30 iki 60 laipsnių. Kuo bukesnis kampas, tuo
didesnis valomas plotas.
Per gydymo procedūrą didelio greičio siurblį
nukreipkite link oro ir miltelių srovės, nukrypusios nuo
danties. Atspindžio kampas lygus kritimo kampui.
Darba tehnika
Pavērsiet sprauslas uzgali precīzi pret zoba
virsmu. Ieturiet 3 līdz 5 mm distanci.
Jūs varat mainīt spraustas uzgaļa novie-
tojuma leņķi attiecībā pret zobu no 30 līdz 60
grādiem. Jo šaurāks leņķis, jo tiek notīrīta lielāka
platība.
Procedūras laikā vērsiet augstspiediena
atsūcēju pret izlietotā gaisa/pulvera strūklu, kas
tiek novirzīta no zoba. Strūklas atstarošanās
leņķis ir vienāds ar tās krišanas leņķi.
10/2/2014 4:30:50 PM