Closing the cap
Clean the threads of the powder chamber before
screwing on the cap.
Ensure that the cap is correctly screwed to
avoid projection of powder.
Do not shake the device as this could cause
the powder to clog the tubes.
Check that you get a water spray.
24
FB-543_6_ed_2014_10_Handy 3 Perio.indd 24
Dangtelio uždėjimas
Prieš užsukdami dangtelį, išvalykite miltelių kameros
sriegius.
Įsitikinkite, kad dangtelis tinkamai užsuktas ir
milteliai neišsibarstys.
Prietaiso nepurtykite, nes milteliai gali užkimšti
vamzdelius.
Įsitikinkite, kad yra vandens čiurkšlė.
Vāciņa aizvēršana
Pirms vāciņa uzskrūvēšanas, iztīriet pulvera
tvertnes vītni.
Lai nepieļautu pulvera izkaisīšanos, pārlie-
cinieties, ka vāciņš ir uzskrūvēts pareizi.
Nekratiet ierīci - pulveris var radīt aizspros-
tojumus caurulēs.
Pārbaudiet, vai darbojas ūdens strūkla.
10/2/2014 4:30:40 PM