Advertisement
97.
Attach Door Handle, Exterior Barrel Bolt and Interior Barrel Bolt to door. Handle is positioned
on top door, Barrel Bolt on bottom door and Interior Barrel Bolt to top door stud. Attach Barrel Bolts
with 3/4" Black Screws. Note how female part of Barrel Bolt is positioned higher than male. Do a dry
run first to position Barrel Bolt correctly. Important: Drill shallow pilot holes with 1/8" drill bit prior to
securing with screws to prevent wood splitting.
98.
Attach Horizontal Door Stop (1/2" x 2 1/2" x 35 1/4") and Vertical Door Stops
(1/2" x 2 1/2" x 72") to door jamb and wall framing. Use 4 - 2" screws to secure Horizontal
Stop, and 6 - 2" screws per Vertical Stop. Door Stops should overhang the door by
approximately 1/2". Start with the Horizontal Stop first.
Toll Free 1-888-658-1658
Temporarily positioned
Interior Door Stop to
help align Interior
Barrel Bolt.
www.outdoorlivingtoday.com
Page 43
sales@outdoorlivingtoday.com
Advertisement
