Download Print this page

OLT 8x12 Santa Rosa Assembly Manual page 21

Hide thumbs Also See for 8x12 Santa Rosa:

Advertisement

43.
Carefully lift 1 completed Rafter Section up (make sure Soffit is facing down) and place on gable
framing.
Gable Notch
44.
Slide Rafter Section up on gable framing until bottom of Ridge Board slips into gable notch.
Soffit will sit approximately 1/8" away from wall panel.
45.
To confirm Rafter Section alignment - in the front, Rafter will overhang Porch post by
approximately 1/2". Rafter will also overhang the siding of Middle Gable Wall.
Toll Free 1-888-658-1658
Soffit should sit approx.
1/8" away from wall
panel. End Rafter will sit
flush with end of wall.
In Porch area, a
larger gap will occur
between Soffit and
Top Plate.
Rafter will
overhang
Porch Post.
www.outdoorlivingtoday.com
Rafter will slightly
overhang siding
of Middle Gable
Wall.
Page 21
Soffit
sales@outdoorlivingtoday.com

Advertisement

loading