Advertisement
70
. Insert Porch Ceiling Support Strips (3/4" x 1" x 45" - Angle Edge Cut) into the gap between the top
of the Porch Rail Section and the Porch Ceiling Panel. Gently tap into place with a hammer. Once in place,
attach each piece with 3 - 1 1/2" finishing nails up through the Porch Rail Section into the Support Strips.
Flush
71.
Attach Front Bottom Skirting (1/2" x 4 1/2" x 48") around the base of the shed. Skirting will hide
floor framing. Start with Front Skirting positioned flush with the top of the deck boards and the side of the
floor frame. Attach with 6 - 1 1/2" finishing nails per piece.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 31
sales@outdoorlivingtoday.com
Advertisement
