OLT 8x12 Santa Rosa Assembly Manual page 13

Thick edge
of Wall Trim
Support
Deck Board
22.
Next, attach one Outter Deck Board (1" x 5 1/2" x 44 1/2") to
the bottom of each Porch Rail Section. Position the Deck Board
flush with the Long Porch Post on one side and overhanging by
1/2" on the end. Ensure side that is flush with Post is on the same
side as the thick edge of Wall Trim Support.
Fasten Deck Board to the Long Porch Post with 2 - 2 1/2" Screws
per porch rail section. Fasten Wall Trim Support to Deck Board
with 2 - 2 1/2" Screws per porch rail section.
Flush
Toll Free 1-888-658-1658
Flush
23.
With the Porch Rail Sections complete, attach them to
the deck area of the shed. Deck Boards will be positioned
flush with the floor frame in the front corners. Fasten to Floor
Joists with 4 - 2" Screws per Deck Board. Pre-drill for screws
at the ends of the deck boards.
Pre­Drill!
Flush
www.outdoorlivingtoday.com
Page 13
1/2" overhang
Thick edge of Wall
Trim Support
Pre­Drill!
sales@outdoorlivingtoday.com
Thick edge of Wall
Trim Support