Advertisement
90.
Place First Roof Ridge Cap (Lower Grade Undercourse Ridge Cap) on roof peak overhanging
shingles by approximately 2". Attach with 2 - 1 1/2" Shingle Nails 9" from end. Place 2nd Ridge Cap
1" back from 1st cap. Attach with 2 - 1 1/2" Shingle Nails 9" from end.
8"
91.
Place 3rd Ridge Cap 8" back from 2nd (enough to cover shingle
nails). Attach 3rd Ridge Cap down as per Step 90. Continue to position and
attach Ridge Caps until half roof is complete. From opposite side, position
and attach Ridge Caps as described above. Score/cut 1 Ridge Cap to 12"
or to fit in the center of roof. Attach center cap with 4 - 1 1/2" Shingle Nails.
92.
Locate Window Inserts for Regular Window Walls. Before installing, dab caulk in siding channel
on both sides of window opening. This will prevent water from getting in behind window. Position window
in cavity and secure with 8 - 1 1/4" screws. Caulk gap between siding and window at top. This requires a
large amount of caulking but is important to fill. Later, Window Trims will be installed to hide caulking.
Toll Free 1-888-658-1658
Undercourse
Ridge Cap
Dab
caulk in siding
channel on both
sides of window.
www.outdoorlivingtoday.com
8"
Page 41
9" from end
Run
caulk in siding
gap at top. Requires
a large amount.
sales@outdoorlivingtoday.com
Advertisement
