Advertisement
83.
Position the Gusset Gable onto the front of the shed. Push Gable plywood up tight under roof
plywood and against Roof Nailing Strip. Screw through the shingles of the Gusset Gable horizontally
into the Roof Nailing Strip with 8 - 2 1/2" screws.
84.
Position Rear Facia (3/4" x 3 1/2"
x 58" - angle cut ends) tight underneath
roof shingles and tight against Nailing
Strips. Temporarily position Side Facia
(3/4" x 3 1/2" x 71 3/4") for a dry run to
help you correctly position Rear Facia
before attaching.
Attach Rear Facia to Nailing Strips with
8 - 1 1/2" finishing nails per piece. A
small gap may appear where Rear
Facias come together at peak. This gap
will be covered in Step 87.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 38
Small gap
may appear
sales@outdoorlivingtoday.com
Advertisement
