Advertisement
46.
When Rafter Section is aligned correctly, tack Rafter Section temporarily down from Middle
Gable Wall framing into Rafter with 2 - 2" screws.
Note: Metal Ridge Board is
offset with 1st Rafter Section
47.
Place 2nd completed Rafter Section on gable wall framing. Position as per Steps 43 - 46.
Rear Gable
Gable Notch
48.
When both Rafter Sections are correctly aligned, Ridge Boards will sit in both the rear and
middle gable notches. Front Rafters will overhang Porch Posts.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 22
sales@outdoorlivingtoday.com
Advertisement
