Advertisement
Optional: Caulking seams will help
prevent moisture from entering at
seam. Caulking not included in kit.
26.
When all walls are attached together, check
alignment with the floor. Bottom wall plates should sit
flush with outside of floor frame. When positioned
correctly, fasten bottom wall plates to floor using
4 - 2 1/2" screws per wall panel.
27.
Position Rear Top Plates (3/4" x 2 1/2" x 32")
on top of wall studs so they are flush on the inside
with 2x3 wall stud. The Top Plate is comprised of
3 pieces (2 outside pieces with an angle cut on one
end and a center piece that is straight cut). Attach
by screwing down into top wall plate with
4 - 2" screws each.
Angle cut
on ends.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 15
Wall Plate
Angle
screws into perimeter
Floor Joists.
32" wide
Confirm 32" Wide Door
Opening at Top and Bottom.
Top Plates should be flush
with inside of wall framing.
sales@outdoorlivingtoday.com
Advertisement
